The 8mm 08 stepper motor with a parallel-shaft gearbox is designed for precise low-speed positioning in miniature mechanisms. Its compact, offset output layout supports multiple reduction ratios while keeping the motor and output shaft parallel.
This model combines an 8mm stepper motor with a compact parallel-shaft gearbox for controlled incremental movement in miniature mechanisms.
| Reduction Ratio | 50 | 110 | 168 | 210 | 250 | 293 | 350 | 380 | |
| Gearbox length | mm | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
| Step angle | ° | 0.36 | 0.164 | 0.107 | 0.086 | 0.072 | 0.061 | 0.051 | 0.047 |
| Pull in torque(500pps) | g. cm | 173 | 339 | 517 | 647 | 770 | 902 | 1078 | 1170 |
| Rated speed(500pps) | rpm | 150 | 50 | 30 | 15 | 10 | 7.14 | 6 | 5.03 |
For additional customization or reference configurations, please feel free to contact us.
The stepper motor platform supports controlled incremental motion for miniature indexing and positioning applications.
The offset output shaft remains parallel to the motor axis, supporting compact mechanical routing without requiring a 90-degree transmission.
Stepper-based operation supports repeatable movement when matched with the appropriate drive frequency, load and reduction ratio.
The compact motor and gearbox assembly is suitable for small devices where installation space and repeatable positioning are important.
For detailed selection guidance or project-specific requirements, please contact our team for further support.
Tell us your project or application requirements, and our team will get back to you with technical support, product recommendations, or a customized motor solution.
